|
Portals: Miscellaneous: |
Sacred Space: A Collaborative Exhibition:
|
Title: | Toran Gateway |
Designer: | Nadine Jacobs |
Media: | cut paper |
Dimensions: | 12.5' x 16' x 0.5" |
Installation notes: | Entrance to the room is between two vertical banners, 12.5' x 4' each, separated by four smaller banners, 3' x 2' each. Top of each banner is folded over and secured with glue to accommodate a metal tubing support which is suspended from canopy framework. |
Materials list: | Flame resistant paper, spray adhesive, paste glue, metal tubing. |
Title: | Pedestals |
Designer: | Lynda Beck |
Media: | acrylic/pvc, wood |
Dimensions: | 3' x 1.5' diameter |
Installation notes: | Two pedestals are placed on either side of the vertical banners of the gateway for total of four pedestals: two in the entrance proper, two on the outer edges of the gateway. Each pedestal is made up of heavy duty pvc pipe, with round wooden disk for top platform which is held in place by weight of bowls. |
Materials list: | Pvc tubing, wood, latex primer, latex and/or latex enamel house paint, polymer clear coat. |
Title: | Offering Bowls |
Designer: | Maisoun Jaradat; Jackie Ender |
Media: | ceramic; mosaic, paper |
Dimensions: | 10" x 24" diameter |
Installation notes: | These bowls sit on the pedestals beside the gateway banners, and are kept full of origami cranes which visitors are invited to take with them as a memento of their time in Sacred Space. |
Materials list: | Earthenware clay body, lead-free glazes; plastic, mosaic grout, glass mosaic tiles; paper. |
Title: | Benches |
Designer: | Gary Lincoln, Lynda Beck |
Media: | acrylic/wood |
Dimensions: | (2) 24" x 40" x 18", (1) 24" x 80" x 18" |
Installation notes: | The two shorter benches are placed against the back of the vertical banners of the gateway; the longer bench can be placed anywhere outside the gallery. |
Materials list: | Wood, primer, latex and/or latex enamel house paint, polymer clear coat. |
Title: | Origami Canopy |
Designer: | Jennifer Walterscheid, Gary Lincoln |
Media: | folded paper/nylon string/steel frame |
Dimensions: | 4' x 10' x 30' |
Installation notes: | Center suspended frame 14' above floor; strings of white origami cranes are hung from outer edge of frame with 7 strings across the 10' dimension and 25 strings across the 30' dimension; strings of multi-colored origami animals are hung from interior intersections of the 7 x 25 point grid. |
Materials list: | Steel L-bars, nuts & bolts, heavy gage wire, enamel paint on frame, nylon string, paper. |
Title: | Labyrinth |
Designer: | Labyrinth committee |
Media: | acrylic/wool carpet |
Dimensions: | 0.5" x 8' x 16' |
Installation notes: | Center on floor with opening of labyrinth towards the gateway. |
Materials list: | High quality wool carpeting with stitched wool edging, latex and/or latex enamel house paint. |
THE PORTALS | |
General installation notes: |
Top and bottom cleats are provided for wall mounting the portals. Cleats are made from 0.5" medium density overlay (mdo) plywood in 8" widths. The top cleat is load bearing, 4' length. The bottom cleat ensures that the portal will not pull away from the wall, 8" length. Wall mounting cleats are pre-drilled and provided with 3" dry-wall screws. Matching cleats are attached with wood screws to the back of the landscape panels. Top cleat is mounted to wall at approximately 6' above floor level. Bottom cleat height varies. Portals are shipped in three or more pre-drilled pieces and require assembly with dry-wall screws which are provided. |
General materials notes: |
All portals are constructed of 0.5" mdo plywood, painted with KILZ2 acrylic primer, latex and/or latex enamel interior housepaint, and coated with a clear polymer sealant. Landscape cleats attached with wood screws and wood glue. Assembly and mounting screws provided. |
Title: | Islamic Portal with Desert Landscape |
Designer: | Deborah Dimmick |
Media: | acrylic / wood |
Dimensions: | 9.6' x 7.5' x 1.5" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal left and right panels, assembly screws. |
Title: | Jewish Ark Portal with Idyllic Landscape |
Designer: | Joanna Pinkerton |
Media: | acrylic, mixed media / wood |
Dimensions: | 10' x 7' x 1.5" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back and menorah panel attached to front, portal top, left and right panels, eternal light pendant, assembly screws. |
Additional materials: | Jewish months are of paper on mat board, glued to left and right panels. Oil based glaze on rampant lions and eternal flame pendant which hangs on metal chains from hook screws in menorah panel. |
Title: | Gothic Christian Portal with Temperate Forest Landscape |
Designer: | Joanna Pinkerton |
Media: | acrylic / wood |
Dimensions: | 10.5' x 5' x 1.5" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal top left, top right, side left and side right panels, assembly screws. |
Additional materials: | None. |
Title: | Indigenous North American Portal with Arctic Landscape |
Designer: | Wendi Proctor |
Media: | acrylic, mixed media / wood |
Dimensions: | 9.5' x 8' x 6" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal top with sisyutle attachment, portal left and right panels, belt pendant, drumhead pendant, eight mask pendants, assembly screws. Sisyutle and belt pendant attach to portal top panel with screws. Drumhead pendant hangs on leather thongs from hook screws in top panel. Mask pendants have saw-tooth hangers attached to back. Matching screws are in place on front of portal left and right panels. |
Additional materials: | Wooden beads, polymer clay, feathers, fake fur, abalone shell. |
Title: | Indigenous South American Portal with Rainforest Landscape |
Designer: | Joanna Pinkerton |
Media: | acrylic, mixed media / wood |
Dimensions: | 9.5' x 8' x 12" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal top, portal left and right panels, monkey attachment, frog attachments, assembly screws. |
Additional materials: | Palm thatch, heavy weight cardboard tubing, quilt batting, craft paper, polymer clay. |
Title: | Indigenous West African Portal with Grassland Landscape |
Designer: | Kathy Hull |
Media: | acrylic, mixed media / wood |
Dimensions: | 10' x 5' x 4" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back and akuaba figure glued to front, portal left and right panels, assembly screws. |
Additional materials: | Tool box liner foam and foam adhesive. |
Title: | Chinese Buddhist Portal with Temperate Forest Landscape |
Designer: | Carrie Nelson |
Media: | acrylic, mixed media / wood |
Dimensions: | 8' x 8' x 3" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal left and right panels with decorative attachments, front step panel with panda attachment on front and 1" wood spacer blocks attached to back, assembly screws. |
Additional materials: | Wood ornamentals, fun foam. |
Title: | Balinese Hindu Portal with Rainforest Landscape |
Designer: | Kathy Hull |
Media: | acrylic / wood |
Dimensions: | 10' x 8' x 2" |
Installation notes: | Top and bottom wall cleats, landscape panel with matching cleats on back, portal left and right panels with guardian attachments, assembly screws. |
Additional materials: | None. |